artists_logo.gif Artist's Marketplacee
  Your interactive artists' community
Monday, December 01, 2008 Register | Login
     
 
Artists Network
Subject: Acrylic skin tones...

You are not authorized to post a reply.   
Author Messages
futurecreations

Posts:28

12/29/2007 10:10 PM Alert 

Hi everyone,

I was wondering if anyone out there has a favorite acrylic mixture for realistic skin tones? I struggle with skin tones every time I try to paint the human anatomy.

Thanks, Laurie

claydesigner2156
Posts:13

01/02/2008 9:26 AM Alert 

Hi Laurie,

In watercolor, which I am relatively new at, I found 2 colors that are fabulous for lighter skin tones...won't work for dark skins. ..the colors are Opera and Jaunne Brilliant (1 and 2).  They are by Holbein.  Now since i paint in acrylics too, I just try to approximate the same colors.  I think alizarin crimson andn unbleached titanium might be a start.  Obviously, you'll have to determine if other colors need to be added to the mix.  If you try the WC colors, you'll see what I mean.

Hope that helps some.
Yvonne


Rusty gal
futurecreations

Posts:28

01/02/2008 3:30 PM Alert 
Hi Yvonne,
Thanks for the input. I tried cadmium red hue (tiny amount) lots of titanium white, then added a tad bit of ochre yellow and burnt sienna, lots more white and watered it down to water color consistency and then washed/layered it...turned out pretty good.
Laurie
claydesigner2156
Posts:13

01/02/2008 5:58 PM Alert 


Great.  If you use the unbleached titanium you might not even need the yellow ochre since it has a yellowish caste and also won't be as chalky as with the reg. titanium.  Whatever works best for you though.

Yvonne


Rusty gal
Maggie429

Posts:447

01/03/2008 1:49 PM Alert 
Hi Laurie

I used oils and use a combination of - raw sienna, white, cad red (very little), blue (just a very small amount), burnt umber (great for shading) and if needed a bit of ochre yellow. If their skin is on the fair side, I do not add the ochre, if they are more on the european side, I use more raw sienna with a touch of burnt umber. You can also add all the above to a flesh tone (makes it more realistic).

Hope this helps.

Maggie

Mgi
www.hoviscreations.com
sdefnall

Posts:15

01/19/2008 11:16 PM Alert 
I find that if I use burnt sienna and titanium white I can mix a variety of skin tones also burnt umber can be used for shading but I tend to vary the shading depending upon the back ground I will put ultra marine or occasionally a violet color to get it to look more realistic. Danielle Green had an excellent article in on of the artist magazines a couple years ago that showed his pallete for skin tones. If I can find it i will let you know what his colors are.

Steven

"imagination is more important than knowledge"
Albert Einstein

artofsdefnall.blogspot.com
You are not authorized to post a reply.
Forums > Join the Discussion > Tech Talk > Acrylic skin tones...



ActiveForums 3.6